Description
WHAT'S INCLUDED
- Millermatic 141
- Hook-and-loop cord wraps
- 6.5-ft. (2 m) power cord with plug
- 10-ft. (3 m) MDX™-100 MIG Welding Gun
- 10-ft. (3 m) work cable with clamp
- Argon and AR/CO2 mix flow gauge regulator with gas hose
- Hobart® spool of .030-in. (0.8 mm) solid wire
- Quick Select drive rolls for .024-in (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
- Two contact tips for .030-in. (0.8 mm) wire
- Material thickness gauge (#229 895)
Auto-Set™
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
120V Input Power
Uses 120V household input power so there is no special power requirements. Flexible to use in any location!
Manual Mode
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Smooth-Start™
This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.
Angled All Aluminum Drive System
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.
Auto Spool Gun Detect™
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Quick Select™ Drive Roll
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Thermal Overload & 'Tip Saver' Short Circuit Protection
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
Generator Compatible
The Millermatic 141 will be able to operate and provide full output when powered by generators with 4500 Watt (4.5K) output or higher, such as a Miller Blue Star 185 (6200 watts) or Fusion 160 (6200 watts) generator. Limited output will occur when used with smaller generators.
NOT INCLUDED
- Shielding gas for welding with solid wire (GMAW)
- Spool Gun for welding aluminum
- Personal safety products (helmet, gloves)
- Small running gear/cylinder rack
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
51LB
Width
11.25in
Length
20.5in
Applicable Materials
Mild steel, stainless steel (aluminum as well if utilizing optional spoolgun)
Duty Cycle
20% @90 amps
Input Power Voltage
120V 60 Hz
Item Depth
20.50000
Item Height
12.50000
Item Width
11.25000
Machine Model
Millermatic 141
MIG Gun Amperage Rating Max
100
MIG Gun Item Length
10
MIG Gun Series
MDX 100
Net Weight
51.00000
Output Range Max
140
Output Range Min
30
Portability
Running Gear w/Wheels,Handles
Rated Output Max 120V Amps
90
Rated Output Max 120V Volts
18.50
Spoolgun Capable
Yes
Spot Timer
No
Thermal Overload Protection
Yes
Voltage|Wire Speed Controls
Infinite
selection not available, try a different combination
selection not available, try a different combination
$1,462.00
Compare