Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Bobcat™ 260 EFI with Remote Start/Stop
Description
Features
WHAT'S INCLUDED
- Remote Start/Stop fob
NEW Remote Start/Stop
Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.
- Simple: One button to start and stop the Bobcat.
- Durable: Tough and water-resistant with a three-year warranty.
- Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.
Savings on Fuel and Maintenance
A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.
Electronic Fuel Injection (EFI)
Improve fuel efficiency for maximum productivity and profitability. EFI gas engines optimize the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, and longer runtimes. EFI-equipped machines perform better compared to carbureted models:
- 12,000 watts of generator power
- Up to 27 percent better fuel efficiency — save up to $1,000 per year in fuel and extend runtimes by as much as 2.5 hours per tank
- Fast, easy starts in all climates — no choke required
- Reliable operation, even with infrequent use — less prone to fuel deterioration
- Fewer emissions — 27 percent less CO and 33 percent lower HC+NOx levels
Jobsite Safety
The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.
Designed for Reliability
From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:
- Copper windings and iron generator components for a quality-built machine
- Lugged — not soldered — heavy internal leads for better field durability
- Superior cooling technology for maximum performance and engine life
- Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
- Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
Small, Light Design
Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.
Easy Maintenance
With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
- Oil checks that can be performed easily through the top of the machine by the access door
- Toolless panels that allow for quick access
- Single-side fuel fill and oil drain/filter
NOT INCLUDED
- Weld leads
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
501LB
Width
20in
Length
40.5in
Fuel Type
Gas
Item Height
28.00000
Machine Model
Bobcat
Member Supplier Source
Manufacturer
Prop65 Required
Yes
Standard Pack Units
1.0
selection not available, try a different combination
selection not available, try a different combination
$0.00
Compare
Bobcat™ 260 EFI with Remote Start/Stop
Description
Features
WHAT'S INCLUDED
- Remote Start/Stop fob
NEW Remote Start/Stop
Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.
- Simple: One button to start and stop the Bobcat.
- Durable: Tough and water-resistant with a three-year warranty.
- Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.
Savings on Fuel and Maintenance
A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.
Electronic Fuel Injection (EFI)
Improve fuel efficiency for maximum productivity and profitability. EFI gas engines optimize the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, and longer runtimes. EFI-equipped machines perform better compared to carbureted models:
- 12,000 watts of generator power
- Up to 27 percent better fuel efficiency — save up to $1,000 per year in fuel and extend runtimes by as much as 2.5 hours per tank
- Fast, easy starts in all climates — no choke required
- Reliable operation, even with infrequent use — less prone to fuel deterioration
- Fewer emissions — 27 percent less CO and 33 percent lower HC+NOx levels
Jobsite Safety
The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.
Designed for Reliability
From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:
- Copper windings and iron generator components for a quality-built machine
- Lugged — not soldered — heavy internal leads for better field durability
- Superior cooling technology for maximum performance and engine life
- Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
- Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
Small, Light Design
Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.
Easy Maintenance
With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
- Oil checks that can be performed easily through the top of the machine by the access door
- Toolless panels that allow for quick access
- Single-side fuel fill and oil drain/filter
NOT INCLUDED
- Weld leads
