Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Miller Deltaweld 350 MIGRunner w/Intellx Pro Feeder
Description
WHAT'S INCLUDED
- Deltaweld® 350 with ArcConnect™
- Intellx™ Pro Wire Feeder
- Bernard™ BTB Gun 300 A
- .035/.045 in. V-groove Drive Rolls
- Deltaweld 350 Running Gear/Cylinder Rack
- Feeder Swivel Kit
- Cart Accessory Kit
- ArcConnect Control/Motor Cable 9ft.
Easy to use
EZ-Set simplifies parameter setup based on material thickness, removing complexity and reducing welder training time.
Legacy meets pulse
Pulsed MIG-capable Deltaweld with Intellx Pro feeder provides a 28-percent wider operating window and a more forgiving arc, compensating for variations in operator technique. Welders of any skill level can get into production quicker. Make your move.
ArcConnect™
Next generation communication to improve weld performance and allow point-of-use controls to be located at the feeder.
Fan-On-Demand™
Operates only when needed reducing noise, power consumption, and the amount of airborne contaminants going through the machine.
Ready to weld
The Deltaweld 350 System is shipped as a complete package with everything you need to get welding sooner. Just hook up your primary power, add gas, wire and a welding gun, and you're ready to weld.
Dedicated wire feeder options
• Intellx feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments.
• Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
• Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
Backwards Compatibility
A model is available with both ArcConnect and the standard Miller 14 Pin for use with older Miller wirefeeders.
Wind Tunnel Technology
Internal air flow that protects electrical components and PC boards from dirt, dust, debris— greatly improving reliability.
Measures Productivity
Get visibility into your operation with easy to understand reports. Insight Core is available on select Deltaweld models. Learn More.
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
520LB
Width
34in
Length
59.38in
Applicable Materials
Mild steel, stainless steel and aluminum
Duty Cycle
30%
Input Power Voltage
208V/230V/460V 60 Hz
Item Depth
29.15000
Item Height
32.00000
Item Width
15.35000
Machine Model
DeltaWeld
MIG Gun Amperage Rating Max
300
MIG Gun Item Length
15
MIG Gun Series
BTB
Net Weight
115.00000
Output Range Max
400
Output Range Min
20
Portability
MIGRunner Cart
Rated Output Max 208|230V Amps
425
Rated Output Max 208|230V Volts
35.25
Rated Output Max 460V Amps
425
Rated Output Max 460V Volts
35.25
Spoolgun Capable
No
Voltage|Wire Speed Controls
Yes
selection not available, try a different combination
selection not available, try a different combination
Compare
Miller Deltaweld 350 MIGRunner w/Intellx Pro Feeder
Description
WHAT'S INCLUDED
- Deltaweld® 350 with ArcConnect™
- Intellx™ Pro Wire Feeder
- Bernard™ BTB Gun 300 A
- .035/.045 in. V-groove Drive Rolls
- Deltaweld 350 Running Gear/Cylinder Rack
- Feeder Swivel Kit
- Cart Accessory Kit
- ArcConnect Control/Motor Cable 9ft.
Easy to use
EZ-Set simplifies parameter setup based on material thickness, removing complexity and reducing welder training time.
Legacy meets pulse
Pulsed MIG-capable Deltaweld with Intellx Pro feeder provides a 28-percent wider operating window and a more forgiving arc, compensating for variations in operator technique. Welders of any skill level can get into production quicker. Make your move.
ArcConnect™
Next generation communication to improve weld performance and allow point-of-use controls to be located at the feeder.
Fan-On-Demand™
Operates only when needed reducing noise, power consumption, and the amount of airborne contaminants going through the machine.
Ready to weld
The Deltaweld 350 System is shipped as a complete package with everything you need to get welding sooner. Just hook up your primary power, add gas, wire and a welding gun, and you're ready to weld.
Dedicated wire feeder options
• Intellx feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments.
• Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
• Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
Backwards Compatibility
A model is available with both ArcConnect and the standard Miller 14 Pin for use with older Miller wirefeeders.
Wind Tunnel Technology
Internal air flow that protects electrical components and PC boards from dirt, dust, debris— greatly improving reliability.
Measures Productivity
Get visibility into your operation with easy to understand reports. Insight Core is available on select Deltaweld models. Learn More.
