0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
MIL907734 MIL907734
MIL907734 MIL907734
MIL907734 MIL907734

Miller Millermatic 255 Pulsed MIG Welder

Item Code: MIL907734
Category MIG Welders
Manufacturer Miller Electric Mfg LLC

Description

Millermatic 255 MIG/Pulsed MIG Welder - 208/240V

WHAT'S INCLUDED

  • Power source with 10 ft. (3 m) power cord
  • 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
  • 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
  • Flow gauge regulator and gas hose for argon or AR/CO2 mix
  • Extra contact tips
  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls
  • Material Thickness Gauge
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
 
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
 
Auto-Set™ Elite
offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
 
Program mode allows easy save and recall of favorite weld settings.
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
 
Auto-Line™ Technology
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
 
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
 
MDX-250 MIG Gun w/ AccuLock™ S consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance.
 
Portability - Machine only weighs 84 lb.
Weight is reduced by more than 50 percent compared to the Millermatic 252.
 
Optional EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
 
Generator Compatible
The Millermatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators.
 

NOT INCLUDED

  • Shielding gas and safety equipment not included.
  • Shielding gas (for welding with solid wire [GMAW])
  • Welding wire
  • Push-Pull Gun (for welding aluminum)
  • Spool Gun (for welding aluminum)
  • Flux cored drive rolls (for welding with flux cored wire [FCAW])
  • Personal safety products (helmet, gloves)
Lead Time

1

UNSPSC Code

23270000

Weight

84LB

Width

13.75in

Length

26.25in

Applicable Materials

Mild steel, stainless steel (aluminum as well if utilizing optional spool or push-pull gun)

Duty Cycle

60% @230 amps

Input Power Voltage

208/240V 50/60 Hz

Item Depth

24.25

Item Height

19.25000

Item Width

13.75000

Machine Model

Millermatic 255

MIG Gun Amperage Rating Max

250

MIG Gun Item Length

15

MIG Gun Series

MDX 250

Net Weight

84.00000

Output Range Max

350

Output Range Min

20

Portability

Handles

Rated Output Max 208|230V Amps

230

Rated Output Max 208|230V Volts

25.50

Spoolgun Capable

Yes

Voltage|Wire Speed Controls

Yes

- +
Starting from
$3,949.00 / EA
/
- +
Compare
MIL907734 MIL907734
MIL907734 MIL907734
MIL907734 MIL907734

Miller Millermatic 255 Pulsed MIG Welder

Item Code: MIL907734
Category MIG Welders
Manufacturer Miller Electric Mfg LLC

Description

Millermatic 255 MIG/Pulsed MIG Welder - 208/240V

WHAT'S INCLUDED

  • Power source with 10 ft. (3 m) power cord
  • 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
  • 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
  • Flow gauge regulator and gas hose for argon or AR/CO2 mix
  • Extra contact tips
  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls
  • Material Thickness Gauge
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
 
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
 
Auto-Set™ Elite
offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
 
Program mode allows easy save and recall of favorite weld settings.
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
 
Auto-Line™ Technology
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
 
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
 
MDX-250 MIG Gun w/ AccuLock™ S consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance.
 
Portability - Machine only weighs 84 lb.
Weight is reduced by more than 50 percent compared to the Millermatic 252.
 
Optional EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
 
Generator Compatible
The Millermatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators.
 

NOT INCLUDED

  • Shielding gas and safety equipment not included.
  • Shielding gas (for welding with solid wire [GMAW])
  • Welding wire
  • Push-Pull Gun (for welding aluminum)
  • Spool Gun (for welding aluminum)
  • Flux cored drive rolls (for welding with flux cored wire [FCAW])
  • Personal safety products (helmet, gloves)
Lead Time

1

UNSPSC Code

23270000

Weight

84LB

Width

13.75in

Length

26.25in

Applicable Materials

Mild steel, stainless steel (aluminum as well if utilizing optional spool or push-pull gun)

Duty Cycle

60% @230 amps

Input Power Voltage

208/240V 50/60 Hz

Item Depth

24.25

Item Height

19.25000

Item Width

13.75000

Machine Model

Millermatic 255

MIG Gun Amperage Rating Max

250

MIG Gun Item Length

15

MIG Gun Series

MDX 250

Net Weight

84.00000

Output Range Max

350

Output Range Min

20

Portability

Handles

Rated Output Max 208|230V Amps

230

Rated Output Max 208|230V Volts

25.50

Spoolgun Capable

Yes

Voltage|Wire Speed Controls

Yes

- +
Starting from
$3,949.00 / EA
/
- +
Compare
SEARCH ×