Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Millermatic 252 Mig Welder - 200(208)/230V
Description
WHAT'S INCLUDED
- Millermatic® 252
- 10 ft (3 m) power cord and plug
- 10 ft (3 m) work cable and clamp
- 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire
- Argon mix regulator/flow gauge and hose
- Extra contact tips
- Factory-installed running gear with EZ-Change™ Single Low Cylinder Rack
- .030/.035 in reversible drive rolls
Highest Output in its Class!
(250 A at 28 VDC). Weld longer on high-end applications.
Large, Digital Front Panel with Built-in Digital Timers Menu
Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Auto Gun Detect™
Miller's Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun. Learn More
Push-Pull Gun Direct Connect
Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.
Angled, Dual-Gear Driven, Cast Aluminum Drive System
Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Change™ Low Cylinder Rack
Allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
EZ-Access™ Consumable Compartment and Parameter Chart.
Set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables. Learn More
NOT INCLUDED
- Shielding gas (for welding with solid wire [GMAW])
- Flux cored drive rolls (for welding with flux cored wire [FCAW])
- Spool Gun (for welding aluminum)
- Welding wire
- Personal safety products (helmet, gloves)
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
234LB
Width
19in
Length
40in
Applicable Materials
Mild steel, stainless steel (aluminum as well if utilizing optional spool or push-pull gun)
Duty Cycle
60% @200 amps
Input Power Voltage
208V/240V 60 Hz
Item Depth
40.00000
Item Height
30.00000
Item Width
19.00000
Machine Model
Millermatic 252
MIG Gun Amperage Rating Max
250
MIG Gun Item Length
15
MIG Gun Series
MDX 250
Net Weight
205.00000
Output Range Max
300
Output Range Min
30
Portability
Running Gear w/Wheels,Handles
Rated Output Max 208|230V Amps
250
Rated Output Max 208|230V Volts
26.50
Spoolgun Capable
Yes
Spot Timer
Yes
Voltage|Wire Speed Controls
Yes
selection not available, try a different combination
selection not available, try a different combination
Compare
Millermatic 252 Mig Welder - 200(208)/230V
Description
WHAT'S INCLUDED
- Millermatic® 252
- 10 ft (3 m) power cord and plug
- 10 ft (3 m) work cable and clamp
- 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire
- Argon mix regulator/flow gauge and hose
- Extra contact tips
- Factory-installed running gear with EZ-Change™ Single Low Cylinder Rack
- .030/.035 in reversible drive rolls
Highest Output in its Class!
(250 A at 28 VDC). Weld longer on high-end applications.
Large, Digital Front Panel with Built-in Digital Timers Menu
Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Auto Gun Detect™
Miller's Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun. Learn More
Push-Pull Gun Direct Connect
Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.
Angled, Dual-Gear Driven, Cast Aluminum Drive System
Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Change™ Low Cylinder Rack
Allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
EZ-Access™ Consumable Compartment and Parameter Chart.
Set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables. Learn More
NOT INCLUDED
- Shielding gas (for welding with solid wire [GMAW])
- Flux cored drive rolls (for welding with flux cored wire [FCAW])
- Spool Gun (for welding aluminum)
- Welding wire
- Personal safety products (helmet, gloves)
