Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Millermatic211 Auto-Set 110/220 Volt Mig Welder
Description
The Millermatic 211 continues to deliver the class-leading advantages that make it one of the most popular all-in-one MIG welders. Easier to use. Easier to move. Easier than ever to get great welding results. Welds material from 24 gauge to 3/8 in thick in a single pass.
WHAT'S INCLUDED
- Millermatic 211
- Hook-and-loop cord wraps
- 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V
- 10 ft (3 m) MDX™-100 MIG gun
- 10 ft (3 m) work cable and clamp
- Argon and AR/CO2 mix regulator/flow gauge with hose
- Spool of Hobart® .030 in (0.8 mm) solid wire
- Two contact tips for .030 in (0.8 mm) wire
- Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
- Material thickness gauge #229895
Advanced Auto-Set™
Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Inverter Technology
Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Quick Select™ Drive Roll
Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
Auto Spool Gun Detect™
Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Fan-On-Demand™
Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
Multi-voltage plug (MVP™)
Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
New Drive System
Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Smooth-Start™
Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.
Generator Compatible
The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
38LB
Width
11.25in
Length
20.5in
Applicable Materials
Mild steel, stainless steel (aluminum as well if utilizing optional spool gun)
Duty Cycle
40% @150 amps (240V)
Input Power Voltage
120/240V 50/60 Hz
Item Depth
20.50000
Item Height
12.50000
Item Width
11.25000
Machine Model
Millermatic 211
MIG Gun Amperage Rating Max
100
MIG Gun Item Length
10
MIG Gun Series
MDX 100
Net Weight
38.00000
Output Range Max
230
Output Range Min
30
Portability
Handles
Rated Output Max 120V Amps
115
Rated Output Max 208|230V Amps
150
Rated Output Max 208|230V Volts
21.50
Spoolgun Capable
Yes
Thermal Overload Protection
Yes
Voltage|Wire Speed Controls
Yes
selection not available, try a different combination
selection not available, try a different combination
Compare
Millermatic211 Auto-Set 110/220 Volt Mig Welder
Description
The Millermatic 211 continues to deliver the class-leading advantages that make it one of the most popular all-in-one MIG welders. Easier to use. Easier to move. Easier than ever to get great welding results. Welds material from 24 gauge to 3/8 in thick in a single pass.
WHAT'S INCLUDED
- Millermatic 211
- Hook-and-loop cord wraps
- 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V
- 10 ft (3 m) MDX™-100 MIG gun
- 10 ft (3 m) work cable and clamp
- Argon and AR/CO2 mix regulator/flow gauge with hose
- Spool of Hobart® .030 in (0.8 mm) solid wire
- Two contact tips for .030 in (0.8 mm) wire
- Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
- Material thickness gauge #229895
Advanced Auto-Set™
Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Inverter Technology
Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Quick Select™ Drive Roll
Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
Auto Spool Gun Detect™
Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Fan-On-Demand™
Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
Multi-voltage plug (MVP™)
Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
New Drive System
Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Smooth-Start™
Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.
Generator Compatible
The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
