0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
ESA0558102554 ESA0558102554
ESA0558102554 ESA0558102554

ESAB® Rebel™/ Rebel ™ EMP 285ic Multi-Process Welder, 120/230 Volt, Single Phase

Item Code: ESA0558102554
Manufacturer ESAB

Description

  • Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
  • sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
  • With ESAB’s new 4-Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in. (1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm).
  • Unmatched Portability/Mobility – weighing in at 70 lbs. (32 kg) with multi-voltage, multi-phase capability and 4-handle roll cage. Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site.
  • TFT Multi-lingual Display – packed full of features, Rebel EMP 285ic has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting giving you the ability to fine tune your welds for the most optimal performance.

Dimensions

Dimensions 673 x 292 x 495 mm (26.5 x 11.5 x 19.5 in.)

Weight

Weight 32 kg (70 lb)

Power Specifications

Conditional Statement       MIG Welding
Phase 1 3    
Max Output (A) 300 A 350 A    
Max Output (V) 34 V 34 V    
Open Circuit Voltage     68 VDC  
Protection Class     IP23S  
Voltage Range (V)     90-270 VAC 12 - 34 V
Current Range(A) 5-300 A 5-350 A    
Supply Plug NEMA 6-50P (230 V) no plug    

Wire Feeder Specifications

Max Spool Diameter 100, 200, 300 mm (4, 8, 12 in.)        
Wire Diameter   0.8-1.6 mm (.030-1/16 in.) 0.8-1.4 mm (.030-.052 in.) 0.8-1.4 mm (.030-.052 in.) 0.8-1.4 mm (.030-.052 in.)
Wire Feed Speed 1.5-20.3 m/min (60-800 in./min)        
Metal   Flux Cored Mild Steel Stainless Steel Aluminum

Welding Output

Model 1ph 3ph
MIG (GMAW/FCAW) 285 A/28V @ 40% 40degC (104 degF)
220 A/25V @ 60% 40degC (104 degF)
160 A/22V @ 100% 40degC (104 degF)
200 A/24V @ 100% 40degC (104 degF)
285 A/28.25V @ 50% 40degC (104 degF)
265 A/27.25V @ 60% 40degC (104 degF)
STICK (SMAW) 260 A/30V @ 40% 40degC (104 degF)
210 A/28.4V @ 60% 40degC (104 degF)
135 A/25.4V @ 100% 40degC (104 degF)
285 A/31.4V @ 50% 40degC (104 degF)
255 A/30.2V @ 60% 40degC (104 degF)
Stick (SMAW)   180 A/27.2V @ 100% 40degC (104 degF)
TIG (GTAW) 285 A/21.4V @ 40% 40degC (104 degF)
240 A/19.6V @ 60% 40degC (104 degF)
185 A/17.4V @ 100% 40degC (104 degF)
220 A/18.8V @ 100% 40degC (104 degF)
285 A/21.4V @ 50% 40degC (104 degF)
265 A/20.6V @ 60% 40degC (104 degF)

Input Voltage

Voltage 120-240 VAC 460-575 VAC
Phase 1 3
Frequency 50/60 Hz 50/60 Hz
Lead Time

1

Accessories

ESAB TXH 201 5/8 npt 12.5 ft. (3.8 m) TIG Torch Outfit 0558102493

Duty Cycle

CV: MIG/Flux Cored - 230 VAC - 285 Amps At 28.25V - 40% Duty Cycle

HTS Classification Number

8515390040

Industry Type

Fabrication

Input Power Hertz

50/60 Hz

Input Power Phase

Single

Item Depth Metric

49.5300

Item Depth US

19.5000

Item Length Metric

29.2100

Item Width Metric

67.3100

Item Width US

26.5000

Machine Model

ESAB Rebel EMP 285ic

Net Weight US

70.0000

Process

SMAW

Wire Feed Speed Range~Max

800

- +
Starting from
$0.00
- +
Compare
ESA0558102554 ESA0558102554
ESA0558102554 ESA0558102554

ESAB® Rebel™/ Rebel ™ EMP 285ic Multi-Process Welder, 120/230 Volt, Single Phase

Item Code: ESA0558102554
Manufacturer ESAB

Description

  • Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
  • sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
  • With ESAB’s new 4-Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in. (1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm).
  • Unmatched Portability/Mobility – weighing in at 70 lbs. (32 kg) with multi-voltage, multi-phase capability and 4-handle roll cage. Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site.
  • TFT Multi-lingual Display – packed full of features, Rebel EMP 285ic has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting giving you the ability to fine tune your welds for the most optimal performance.

Dimensions

Dimensions 673 x 292 x 495 mm (26.5 x 11.5 x 19.5 in.)

Weight

Weight 32 kg (70 lb)

Power Specifications

Conditional Statement       MIG Welding
Phase 1 3    
Max Output (A) 300 A 350 A    
Max Output (V) 34 V 34 V    
Open Circuit Voltage     68 VDC  
Protection Class     IP23S  
Voltage Range (V)     90-270 VAC 12 - 34 V
Current Range(A) 5-300 A 5-350 A    
Supply Plug NEMA 6-50P (230 V) no plug    

Wire Feeder Specifications

Max Spool Diameter 100, 200, 300 mm (4, 8, 12 in.)        
Wire Diameter   0.8-1.6 mm (.030-1/16 in.) 0.8-1.4 mm (.030-.052 in.) 0.8-1.4 mm (.030-.052 in.) 0.8-1.4 mm (.030-.052 in.)
Wire Feed Speed 1.5-20.3 m/min (60-800 in./min)        
Metal   Flux Cored Mild Steel Stainless Steel Aluminum

Welding Output

Model 1ph 3ph
MIG (GMAW/FCAW) 285 A/28V @ 40% 40degC (104 degF)
220 A/25V @ 60% 40degC (104 degF)
160 A/22V @ 100% 40degC (104 degF)
200 A/24V @ 100% 40degC (104 degF)
285 A/28.25V @ 50% 40degC (104 degF)
265 A/27.25V @ 60% 40degC (104 degF)
STICK (SMAW) 260 A/30V @ 40% 40degC (104 degF)
210 A/28.4V @ 60% 40degC (104 degF)
135 A/25.4V @ 100% 40degC (104 degF)
285 A/31.4V @ 50% 40degC (104 degF)
255 A/30.2V @ 60% 40degC (104 degF)
Stick (SMAW)   180 A/27.2V @ 100% 40degC (104 degF)
TIG (GTAW) 285 A/21.4V @ 40% 40degC (104 degF)
240 A/19.6V @ 60% 40degC (104 degF)
185 A/17.4V @ 100% 40degC (104 degF)
220 A/18.8V @ 100% 40degC (104 degF)
285 A/21.4V @ 50% 40degC (104 degF)
265 A/20.6V @ 60% 40degC (104 degF)

Input Voltage

Voltage 120-240 VAC 460-575 VAC
Phase 1 3
Frequency 50/60 Hz 50/60 Hz
Lead Time

1

Accessories

ESAB TXH 201 5/8 npt 12.5 ft. (3.8 m) TIG Torch Outfit 0558102493

Duty Cycle

CV: MIG/Flux Cored - 230 VAC - 285 Amps At 28.25V - 40% Duty Cycle

HTS Classification Number

8515390040

Industry Type

Fabrication

Input Power Hertz

50/60 Hz

Input Power Phase

Single

Item Depth Metric

49.5300

Item Depth US

19.5000

Item Length Metric

29.2100

Item Width Metric

67.3100

Item Width US

26.5000

Machine Model

ESAB Rebel EMP 285ic

Net Weight US

70.0000

Process

SMAW

Wire Feed Speed Range~Max

800

- +
Starting from
$0.00
- +
Compare
SEARCH ×