Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
ESAB® Rebel™/ Rebel ™ EMP 285ic Multi-Process Welder, 460 - 575 Volt, Three Phase with Cart
Description
- Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
- sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
- With ESAB’s new 4-Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in. (1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm).
- Unmatched Portability/Mobility – weighing in at 70 lbs. (32 kg) with multi-voltage, multi-phase capability and 4-handle roll cage. Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site.
- TFT Multi-lingual Display – packed full of features, Rebel EMP 285ic has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting giving you the ability to fine tune your welds for the most optimal performance.
Dimensions
| Dimensions | 673 x 292 x 495 mm (26.5 x 11.5 x 19.5 in.) |
Weight
| Weight | 32 kg (70 lb) |
Power Specifications
| Conditional Statement | MIG Welding | |||
| Phase | 1 | 3 | ||
| Max Output (A) | 300 A | 350 A | ||
| Max Output (V) | 34 V | 34 V | ||
| Open Circuit Voltage | 68 VDC | |||
| Protection Class | IP23S | |||
| Voltage Range (V) | 90-270 VAC | 12 - 34 V | ||
| Current Range(A) | 5-300 A | 5-350 A | ||
| Supply Plug | NEMA 6-50P (230 V) | no plug |
Wire Feeder Specifications
| Max Spool Diameter | 100, 200, 300 mm (4, 8, 12 in.) | ||||
| Wire Diameter | 0.8-1.6 mm (.030-1/16 in.) | 0.8-1.4 mm (.030-.052 in.) | 0.8-1.4 mm (.030-.052 in.) | 0.8-1.4 mm (.030-.052 in.) | |
| Wire Feed Speed | 1.5-20.3 m/min (60-800 in./min) | ||||
| Metal | Flux Cored | Mild Steel | Stainless Steel | Aluminum |
Welding Output
| Model | 1ph | 3ph |
| MIG (GMAW/FCAW) | 285 A/28V @ 40% 40degC (104 degF) 220 A/25V @ 60% 40degC (104 degF) 160 A/22V @ 100% 40degC (104 degF) |
200 A/24V @ 100% 40degC (104 degF) 285 A/28.25V @ 50% 40degC (104 degF) 265 A/27.25V @ 60% 40degC (104 degF) |
| STICK (SMAW) | 260 A/30V @ 40% 40degC (104 degF) 210 A/28.4V @ 60% 40degC (104 degF) 135 A/25.4V @ 100% 40degC (104 degF) |
285 A/31.4V @ 50% 40degC (104 degF) 255 A/30.2V @ 60% 40degC (104 degF) |
| Stick (SMAW) | 180 A/27.2V @ 100% 40degC (104 degF) | |
| TIG (GTAW) | 285 A/21.4V @ 40% 40degC (104 degF) 240 A/19.6V @ 60% 40degC (104 degF) 185 A/17.4V @ 100% 40degC (104 degF) |
220 A/18.8V @ 100% 40degC (104 degF) 285 A/21.4V @ 50% 40degC (104 degF) 265 A/20.6V @ 60% 40degC (104 degF) |
Input Voltage
| Voltage | 120-240 VAC | 460-575 VAC |
| Phase | 1 | 3 |
| Frequency | 50/60 Hz | 50/60 Hz |
Specifications
Lead Time
1
Accessories
ESAB TXH 201 5/8 npt 12.5 ft. (3.8 m) TIG Torch Outfit 0558102493
Duty Cycle
MIG: 285 A / 28 V @ 50% Duty Cycle
HTS Classification Number
8515390040
Industry Type
Fabrication
Input Power Hertz
50/60 Hz
Input Power Phase
Three
Item Depth Metric
49.5300
Item Depth US
19.5000
Item Length Metric
29.2100
Item Width Metric
67.3100
Item Width US
26.5000
Machine Model
ESAB Rebel EMP 285ic
Net Weight US
70.0000
Process
MIG (GMAW)
Wire Feed Speed Range~Max
800
selection not available, try a different combination
selection not available, try a different combination
Compare
