Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Miller XMT 350 CC/CV, S-74D, MIGRunner Package
Description
Features
WHAT'S INCLUDED
- 10ft work cable with clamp
- 3ft gas hose
- 6ft 2/0 wire feeder to power source weld cable
- Bernard Q300 Gun
- MIGRunner Cart
- Regulator/flowmeter
- S-74D wire feeder
- XMT 350 CC/CV
Auto-Line™ Power Management Technology
Allows for any input voltage hookup (208-575 VAC, single- or three phase) with no manual linking, providing convenience in any job setting,. Ideal solution for dirty or unreliable input power. Learn More
Advanced features for the professional welder
Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion. Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications. Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high frequency.
Standard 14-pin Receptacle
Has the flexibility to be used with spool guns, feeders, and remote controls.
Welder friendly control panel
Process selector switch reduces the number of control setup combinations without reducing any features. Ultra-tough, polycarbonate-blended cover protects front controls from damage. Large, dual digital meters are easy to view and presettable to ease setting weld output.
Output connector choices
Dinse- or Tweco®-style weld cable connectors provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.)
Reliability
Wind Tunnel Technology™ protects internal components, greatly improving reliability. Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
281LB
Width
28in
Length
30in
Item Height
40.00000
Machine Model
XMT
Member Supplier Source
Manufacturer
Prop65 Required
Yes
Standard Pack Units
1.0
selection not available, try a different combination
selection not available, try a different combination
$12,164.00
Compare
Miller XMT 350 CC/CV, S-74D, MIGRunner Package
Description
Features
WHAT'S INCLUDED
- 10ft work cable with clamp
- 3ft gas hose
- 6ft 2/0 wire feeder to power source weld cable
- Bernard Q300 Gun
- MIGRunner Cart
- Regulator/flowmeter
- S-74D wire feeder
- XMT 350 CC/CV
Auto-Line™ Power Management Technology
Allows for any input voltage hookup (208-575 VAC, single- or three phase) with no manual linking, providing convenience in any job setting,. Ideal solution for dirty or unreliable input power. Learn More
Advanced features for the professional welder
Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion. Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications. Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high frequency.
Standard 14-pin Receptacle
Has the flexibility to be used with spool guns, feeders, and remote controls.
Welder friendly control panel
Process selector switch reduces the number of control setup combinations without reducing any features. Ultra-tough, polycarbonate-blended cover protects front controls from damage. Large, dual digital meters are easy to view and presettable to ease setting weld output.
Output connector choices
Dinse- or Tweco®-style weld cable connectors provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.)
Reliability
Wind Tunnel Technology™ protects internal components, greatly improving reliability. Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
