Description
Two-in-one design for maximum versatility
- High-power cutting on thick metal
- FineCut consumables enable high quality cuts on thin metal, leaving a clean edge and a narrow kerf
System includes:
- Power supply, 4,5 m (15') Duramax LT hand torch with standard consumables, 4,5 m (15') work clamp
- 240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits (CSA models)
- Operator and safety manuals
- Consumable kit with 1 standard nozzle, 1 electrode, 1 FineCut nozzle and 1 FineCut deflector
- Plastic carry case
- Carrying strap
- Leather gloves*
- Shade 5 glasses*
Capacity | Thickness | Cut speed |
---|---|---|
Cutting |
||
Recommended | 10 mm (3/8") | 500 mm/min (20 ipm) |
12 mm (1/2") | 250 mm/min (10 ipm) | |
Severance | 16 mm (5/8") | 125 mm/min (5 ipm) |
Cutting with 120 V input power
Use FineCut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:
- 6 mm (1/4") at 482 mm/min (19 ipm)
- 10 mm (3/8") at 203 mm/min (8 ipm)
- 12 mm (1/2") at 76 mm/min (3 ipm)
Input voltages | 120-240 V, 1-PH, 50/60 Hz |
---|---|
Input current @ 3.8 kW | 120-240 V, 1-PH, 25-18.8 A |
Output current | 15-30 A |
Rated output voltage | 125 VDC |
Duty cycle @ 40°C (104°F) | 35%, 240 V 20%, 120 V |
Open circuit voltage (OCV) | 256 VDC |
Dimensions with handles | 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H |
Weight w/ 4,5 m (15') torch | CSA: 9.7 kg (21.4 lbs) CE, CCC: 9.5 kg (21 lbs) |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate / pressure |
113.3 l/min (4 scfm) at 5.5 bar (80 psi) |
Input power cable length | 3 m (10') |
Power supply type | Inverter - IGBT |
Engine drive requirement | 5.5 kW for full 30 A output |
Certifications | CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian € for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. CCC for use in China. |
Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty. |
Specifications
Weight
22lb
Height
12in
Width
6.6in
Length
14in
Brand
Hypertherm
Category
Plasma Cutting Machines
selection not available, try a different combination
selection not available, try a different combination
$1,620.00
Compare