Description
Rugged and reliable
- Duramax Lock torches are designed for high-impact and heat resistance
- SpringStart technology ensures consistent starting and optimum torch performance
- Hypertherm Certified reliability ensures peak performance even in the most demanding environments
Designed for low environmental impact
- Plasma cutting efficiency is 11% better than its predecessor, enabling you to cut more steel with less power, in less time
- All plasma system components are recyclable
- 14% lighter than its predecessor and delivers more cutting power
Cut capacity
Capacity | Thickness | Cut speed |
---|---|---|
Cutting | ||
Recommended | 16 mm (5/8‚") 22 mm (7/8‚") |
500 mm/min (20 ipm) 250 mm/min (10 ipm) |
Severance (hand cutting) | 29 mm (1-1/8‚") | 125 mm/min (5 ipm) |
Pierce* | 12 mm (1/2‚") |
* Pierce rating for handheld use or with automatic torch height control.
Capacity | Metal removal rate | Groove profile |
---|---|---|
Gouging | ||
Typical gouge | 3,4 kg (7.5 lbs.) per hour | 3,2 mm (.12‚") D x 6,8 mm (.26‚") W |
Production cut chart
Material | Thickness inches |
Current amps |
Production cut speed* ipm |
|
---|---|---|---|---|
Mild steel | 10 GA | 45 | 181 | |
1/4 | 45 | 72 | ||
3/8 | 45 | 38 | ||
1/2 | 45 | 24 | ||
5/8 | 45 | 16 | ||
Stainless steel | 10 GA | 45 | 134 | |
1/4 | 45 | 59 | ||
3/8 | 45 | 29 | ||
1/2 | 45 | 19 | ||
5/8 | 45 | 13 | ||
Aluminum | 1/8 | 45 | 263 | |
1/4 | 45 | 104 | ||
3/8 | 45 | 42 | ||
1/2 | 45 | 26 | ||
5/8 | 45 | 14 |
Engine-driven generator operation
Engine drive rating | System output current | Performance (arc stretch) |
---|---|---|
10 kW | 45 A | Full |
8 kW | 45 A | Limited |
6 kW | 30 A | Full |
Specifications
Input voltages (± 10%) |
CSA | 200‚240 V, 1-PH, 50‚60 Hz OR 480 V, 3-PH, 50‚60 Hz1 |
---|---|---|
CE/CCC | 230 V, 1-PH, 50‚60 Hz OR 400 V, 3-PH, 50‚60 Hz |
|
Input current @ 6.5 kW |
CSA | 200‚240 V, 1-PH, 39/32 A OR 480 V, 3-PH, 9.4 A1 |
CE/CCC | 230 V, 1-PH, 33 A OR 400 V, 3-PH, 10 A |
|
Output current | 10‚45 A | |
Rated output voltage | 145 VDC | |
Duty cycle @ 40° C (104° F) |
CSA | 50% @ 45 A, 200‚240 V, 1-PH |
CE/CCC | 50% @ 45 A, 230 V, 1-PH 60% @ 41 A, 230 V, 1-PH 100% @ 32 A, 230 V, 1-PH 50% @ 45 A, 400 V, 3-PH 60% @ 41 A, 400 V, 3-PH 100% @ 32 A, 400 V, 3-PH |
|
Open circuit voltage (OCV) | 275 VDC (200‚240 V, CSA/CE/CCC and 480 V, CSA) 265 VDC (400 V CE/CCC) |
|
Dimensions with handles | 442 mm (17.4‚") D; 173 mm (6.8‚") W; 357 mm (14.1‚") H | |
Weight with 6.1 m (20') torch | CSA | 14 kg (31 lbs.) |
CE/CCC | 15 kg (33 lbs.) | |
Gas supply | Cutting: air (clean, dry and oil-free), nitrogen, F5 Gouging: air (clean, dry and oil-free), nitrogen, F5 Marking: air (clean dry and oil-free) argon |
|
Recommended gas inlet flow rate/pressure |
188 I/min (400 scfh) @ 5,9 bar (90 psi) | |
Input power cable length | 3 m (10‚') | |
Power supply type | Inverter ‚ IGBT | |
Engine drive requirement | 12.5 kVA (10 kW) for full 45 A output | |
Electrical efficiency | 88% | |
Recyclability | 100% | |
Certifications | CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. | |
Warranty | Power supply: 3-year Torch: 1-year |
Specifications
31lb
14.1in
6.8in
17.4in
Hypertherm
Plasma Cutting Machines