0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

In Stock

Out of Stock

Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
WLDWPWDFLUX1JAR
Weldcote

Weldcote White Anti Borax Flux

Locations: In Stock Item On Order
Item Code: WLDWPWDFLUX1JAR
Category Soldering and Brazing Flux

Document

Description

Procedure: Thoroughly clean the work piece; breaks should be enlarged to a V-notch. Heat the end of the metal rod with a torch and dip into the flux or sprinkle the flux on the work piece. At the right temperature, flux will turn into a liquid that rapidly flows into all cracks and crevices. removing oxides and other impurities. Continue to melt the filler rod until the break or joint is filled, avoiding overheating. It is well to remember that in brazing, only the filler metal is melted. Weldcote White Anti Borax Flux may also be used as a paste by adding water and mixing well. Brush the paste on the work piece and also on the brazing rod, allow the paste to dry and apply heat. Flux residues wash off completely using hot water.
Brand

Weldcote

Category

Soldering and Brazing Flux

- +
Starting from
$59.99 / PKG
/
- +
Change order preference in the cart.
Add to quicklist
Compare
WLDWPWDFLUX1JAR
Weldcote

Weldcote White Anti Borax Flux

Locations: In Stock Item On Order
Item Code: WLDWPWDFLUX1JAR
Category Soldering and Brazing Flux

Document

Description

Procedure: Thoroughly clean the work piece; breaks should be enlarged to a V-notch. Heat the end of the metal rod with a torch and dip into the flux or sprinkle the flux on the work piece. At the right temperature, flux will turn into a liquid that rapidly flows into all cracks and crevices. removing oxides and other impurities. Continue to melt the filler rod until the break or joint is filled, avoiding overheating. It is well to remember that in brazing, only the filler metal is melted. Weldcote White Anti Borax Flux may also be used as a paste by adding water and mixing well. Brush the paste on the work piece and also on the brazing rod, allow the paste to dry and apply heat. Flux residues wash off completely using hot water.
Brand

Weldcote

Category

Soldering and Brazing Flux

- +
Starting from
$59.99 / PKG
/
- +
Change order preference in the cart.
Add to quicklist
Compare
SEARCH ×