Phone: 218-751-1392 
Quick List
Fast Order
Stock Points
Miller maxstar 161 S Stick Welder 120V/240V 160
Description
Features
WHAT'S INCLUDED
- Maxstar® 161 S
- 6.5 ft. (2 m.) primary cords for 120 V and 240 V
- 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
- 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
- Adjustable handle/shoulder strap
Use on 120 and 240 Volt Input Power
Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles
Compact Design Allows for Great Portability
Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based Stick machine can be taken from location to location
No More "Sticky" Electrodes
With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes
Conserve Your Electrodes
With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode
Superior Stick Arc Performance
Even on the difficult-to-run electrodes like E6010
Specifications
Lead Time
1
UNSPSC Code
23270000
Weight
13LB
Width
5.6in
Length
13.5in
Item Height
10.30000
Member Supplier Source
Manufacturer
Prop65 Required
Yes
Standard Pack Units
1.0
selection not available, try a different combination
selection not available, try a different combination
$1,427.00
Compare
Miller maxstar 161 S Stick Welder 120V/240V 160
Description
Features
WHAT'S INCLUDED
- Maxstar® 161 S
- 6.5 ft. (2 m.) primary cords for 120 V and 240 V
- 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
- 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
- Adjustable handle/shoulder strap
Use on 120 and 240 Volt Input Power
Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles
Compact Design Allows for Great Portability
Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based Stick machine can be taken from location to location
No More "Sticky" Electrodes
With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes
Conserve Your Electrodes
With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode
Superior Stick Arc Performance
Even on the difficult-to-run electrodes like E6010
